Pressing Instructions

Preheat the Garment. 280°F–320°F (140°C–160°C) for 5–10 seconds to remove moisture & wrinkles

  • 1st Press: Apply the Transfer

    Temperature: 300°F–320°F (149°C–160°C)
    Time: 12–15 seconds
    Pressure: Heavy / Firm Pressure

  • Instructions:

    Place the DTF transfer film face-up on the garment (design side up).
    Ensure the pressing area is flat and free of seams, zippers, buttons, or wrinkles.
    Press firmly and evenly.
    Peel: Warm Peel
    Warm Peel: Wait a few seconds after pressing, then peel the film once it’s cooled down

  • 2nd Press (Recommended for Durability)

    Temperature: 300°F–320°F (149°C–160°C)
    Time: 3–5 seconds
    Pressure: Heavy / Firm
    Cover Sheet: Use a Teflon sheet or parchment paper to protect the design and fabric.